MCSE Boot Camp Training

LAN Enhancement Components Component Function
*Repeater Resides in the Physical Layer of the OSI model. Regenerates signals for retransmission. Moves packets from one physical media to another. Will pass broadcast storms. Cannot connect different network topologies or access methods.
*Bridge         Resides in the MAC sublayer of the Data Link Layer of the OSI model. Bridges are used to segment networks. They forward packets based on address of destination node. Uses RAM to build a routing table based on source addresses. Will connect dissimilar network topologies. Will forward all protocols. Regenerates the signal at the packet level.
*Remote Bridge Same as bridge, but used for telephone communications. Uses STA (Spanning Tree Algorithm).
*Router     Resides in the Network Layer of the OSI model. Is used to switch and route packets across multiple networks. Uses RAM to build a routing table based on network addresses. Shares status and routing information to other routers to provide better traffic management and bypass slow connections. Will not pass broadcast traffic. Are slower than bridges due to complex functions. Strips off Data Link Layer source and destination addresses and then recreates them for packets. Routers can accomodate multiple active paths between LAN segments.
*Brouter Will act as a router for specified protocols and as a bridge for other specified protocols.
*Gateway Resides in the Transport, Session, Presentation and Application Layers of the OSI model. Used for communications between different network types (i.e. Windows NT and IBM SNA). Takes the packet, strips off the old protocol and repackages it for the receiving network.
*Multiplexer Device that can divide transimissions into two or more channels. Multiplexing - Several signals from different sources are collected into the component and are fed into one cable for transmission.
*Spanning Tree Algortithm - was developed for bridges to determine the most efficient network in path when there are multiple paths to choose from.
 


Click here to continue :
 
 

CCNP BootCamp, CCNP Bootcamps, cisco CCNP Boot Camp, ccnp cisco boot camp, ccnp Training Boot camp, ccnp Upgrade Boot camp, ccnp Boot camp Training, ccnp training Boot camp, ccnp boot camp Classes, cisco ccnp Boot Camp, ccnp BootCamp, ccnp 2003 Bootcamp, cisco ccnp BootCamp, ccnp cisco 2003 bootcamp, ccnp 2000 Bootcamp, ccnp Upgrade Bootcamp, ccnp Bootcamp Training, ccnp training Bootcamp, ccnp bootcamp Classes, cisco ccnp BootCamp, ccnp boot camp, ccnp, Boot camp, ccnp bootcamp, ccnp boot camps, ccnp bootcamps, ccnp camp, ccnp camps, ccnp Boot camp USA, ccnp boot camp UK, ccnp boot camps India, ccnp bootcamps Europe, ccnp camp UK, ccnp camps, ccnp Boot camp asia, ccnp bootcamp usa, ccnp boot camps europe, ccnp bootcamps UK, ccnp camp USA, ccnp camps California, ccnp Boot camp Brighton london, ccnp bootcamp cheapest, UK ccnp boot camps, USA ccnp bootcamps, cheapest ccnp camp, ccnp camps Japan, ccnp camp Australia, ccnp camps Switzerland, boot camps ccnp, Bootcamp ccnp, Boot camp ccnp USA, bootcamp ccnp UK, boot camps ccnp UK, Boot camps, USA, UK, India, brighton, california, Mumbai, Daman, San mateo, america, europe, asia
 

 

MCSE Boot Camp, CCNA Bootcamp, CCNP Boot camp training in UK, USA, JAPAN, India
CCNA Training, MCSE Training, A+ Certification, MCSA, CCNP, Network+, Security+, CISSP, MCSD, CCSP,

MCSE Bootcamp Training - Cheapest, Fast, Guaranteed MCSE certification

 

MCSE Boot Camp, CCNA Bootcamps, CCNP Boot camp Certification Training

MCSE Guide

Free MCSE
Free MCSE Training
MCSE
MCSE 2003
MCSE Books
MCSE Boot Camp
MCSE Brain dumps
MCSE Certification
MCSE Exam
MCSE Free
MCSE Jobs
MCSE Logo
MCSE Online
MCSE Online Training
MCSE Practice
MCSE Practice Exams
MCSE Practice Tests
MCSE Requirements
MCSE Resume
MCSE Salary
MCSE Self Paced Training Kit
MCSE Study
MCSE Study Guide
MCSE Study Guides
MCSE Test
MCSE Testing
MCSE Training
MCSE Training Kit
MCSE Training Video
MCSE Windows 2003
Microsoft MCSE Training
Training MCSE
Windows 2003 MCSE

 

 

MCSE :

Manage applications by using Windows Installer packages.

Windows Installer manages the installation and removal of applications by applying a set of centrally defined setup rules during the installation process. These setup rules define the installation and configuration of the installed application. In addition, you use this service to modify, repair, or remove an existing application. The Windows Installer technology consists of the Windows Installer service for the Windows operating systems and the package (.msi) file format used to hold information regarding the application setup and installations.

Windows Installer manages the installation, addition, and deletion of software components, monitors file resiliency, and maintains basic disaster recovery by way of rollbacks. Additionally, Windows Installer supports installing and running software from multiple sources, and can be customized by developers that want to install custom applications.

To use Windows Installer packages with Windows Explorer:

  • Open Windows Explorer.
  • Right-click the Windows Installer package (.msi file), and then click Install, Repair, or Uninstall.

To install/remove/repair a package using the command line

  • Open Command Prompt.
  • To install, type msiexec /i [package|product_code] and then press ENTER.
  • To remove, type msiexec /x [[package|ProductCode] and then press ENTER.
  • To repair, type msiexec /f[p][o][e][d][c][a][u][m][s][v] {package|ProductCode} and then press ENTER.
    • /f enables one or more of the following command-line options:
    • p - Reinstall only if the file is missing.
    • o - Reinstall if the file is missing or if an older version is installed.
    • e - Reinstall if the file is missing or an equal or older version is installed.
    • d - Reinstall if the file is missing or a different version is installed.
    • c - Reinstall if the file is missing or the stored checksum does not match the calculated value.
    • a - Force all the files to be reinstalled.
    • u - Rewrite all the required user-specific registry entries.
    • m - Rewrite all the required computer-specific registry entries.
    • s - Overwrite all the existing shortcuts.
    • v - Run from source and recache the local package.

Where: package is the name of the Windows Installer package file. product_code is the globally unique identifier (GUID) of the Windows Installer package.