MCSE Boot Camp Training

LAN Enhancement Components Component Function
*Repeater Resides in the Physical Layer of the OSI model. Regenerates signals for retransmission. Moves packets from one physical media to another. Will pass broadcast storms. Cannot connect different network topologies or access methods.
*Bridge         Resides in the MAC sublayer of the Data Link Layer of the OSI model. Bridges are used to segment networks. They forward packets based on address of destination node. Uses RAM to build a routing table based on source addresses. Will connect dissimilar network topologies. Will forward all protocols. Regenerates the signal at the packet level.
*Remote Bridge Same as bridge, but used for telephone communications. Uses STA (Spanning Tree Algorithm).
*Router     Resides in the Network Layer of the OSI model. Is used to switch and route packets across multiple networks. Uses RAM to build a routing table based on network addresses. Shares status and routing information to other routers to provide better traffic management and bypass slow connections. Will not pass broadcast traffic. Are slower than bridges due to complex functions. Strips off Data Link Layer source and destination addresses and then recreates them for packets. Routers can accomodate multiple active paths between LAN segments.
*Brouter Will act as a router for specified protocols and as a bridge for other specified protocols.
*Gateway Resides in the Transport, Session, Presentation and Application Layers of the OSI model. Used for communications between different network types (i.e. Windows NT and IBM SNA). Takes the packet, strips off the old protocol and repackages it for the receiving network.
*Multiplexer Device that can divide transimissions into two or more channels. Multiplexing - Several signals from different sources are collected into the component and are fed into one cable for transmission.
*Spanning Tree Algortithm - was developed for bridges to determine the most efficient network in path when there are multiple paths to choose from.
 

Click here to continue :
 
 
CCNP BootCamp, CCNP Bootcamps, cisco CCNP Boot Camp, ccnp cisco boot camp, ccnp Training Boot camp, ccnp Upgrade Boot camp, ccnp Boot camp Training, ccnp training Boot camp, ccnp boot camp Classes, cisco ccnp Boot Camp, ccnp BootCamp, ccnp 2003 Bootcamp, cisco ccnp BootCamp, ccnp cisco 2003 bootcamp, ccnp 2000 Bootcamp, ccnp Upgrade Bootcamp, ccnp Bootcamp Training, ccnp training Bootcamp, ccnp bootcamp Classes, cisco ccnp BootCamp, ccnp boot camp, ccnp, Boot camp, ccnp bootcamp, ccnp boot camps, ccnp bootcamps, ccnp camp, ccnp camps, ccnp Boot camp USA, ccnp boot camp UK, ccnp boot camps India, ccnp bootcamps Europe, ccnp camp UK, ccnp camps, ccnp Boot camp asia, ccnp bootcamp usa, ccnp boot camps europe, ccnp bootcamps UK, ccnp camp USA, ccnp camps California, ccnp Boot camp Brighton london, ccnp bootcamp cheapest, UK ccnp boot camps, USA ccnp bootcamps, cheapest ccnp camp, ccnp camps Japan, ccnp camp Australia, ccnp camps Switzerland, boot camps ccnp, Bootcamp ccnp, Boot camp ccnp USA, bootcamp ccnp UK, boot camps ccnp UK, Boot camps, USA, UK, India, brighton, california, Mumbai, Daman, San mateo, america, europe, asia
 

 

MCSE Boot Camp, CCNA Bootcamp, CCNP Boot camp training in UK, USA, JAPAN, India
CCNA Training, MCSE Training, A+ Certification, MCSA, CCNP, Network+, Security+, CISSP, MCSD, CCSP,

MCSE Bootcamp Training - Cheapest, Fast, Guaranteed MCSE certification

 

MCSE Boot Camp, CCNA Bootcamps, CCNP Boot camp Certification Training

MCSE Guide

Free MCSE
Free MCSE Training
MCSE
MCSE 2003
MCSE Books
MCSE Boot Camp
MCSE Brain dumps
MCSE Certification
MCSE Exam
MCSE Free
MCSE Jobs
MCSE Logo
MCSE Online
MCSE Online Training
MCSE Practice
MCSE Practice Exams
MCSE Practice Tests
MCSE Requirements
MCSE Resume
MCSE Salary
MCSE Self Paced Training Kit
MCSE Study
MCSE Study Guide
MCSE Study Guides
MCSE Test
MCSE Testing
MCSE Training
MCSE Training Kit
MCSE Training Video
MCSE Windows 2003
Microsoft MCSE Training
Training MCSE
Windows 2003 MCSE

 

 

MCSE :

Monitor and configure removable media, such as tape devices.

Removable media

  • In the graphical view, removable media devices are labeled Removable.
  • You cannot upgrade removable media devices to dynamic volumes.
  • Removable media devices can contain only primary partitions.
  • You cannot mark a primary partition on a removable media device as active

 Implement, manage, and troubleshoot display devices.

Configure multiple-display support.

To use the multiple monitor support feature, you need a PCI or AGP video adapter for each monitor. If you have an onboard video adapter (one that is not a plug-in card but is part of the motherboard) that you want to use as part of a multiple-monitor configuration, it must be set as VGA.

To install additional monitors

  • Insert your additional Peripheral Component Interconnect (PCI) or Accelerated Graphics Port (AGP) video adapter into an available slot, and plug your additional monitor into the card.
  • Turn on your computer. Windows 2000 will detect the new video adapter and install the appropriate drivers.
  • Open Display in Control Panel.
  • On the Settings tab, click the monitor icon that represents the monitor you want to use in addition to your primary monitor.
  • Select the Extend my Windows desktop onto this monitor check box, and then click Apply or OK.

Selecting the Extend my Windows desktop onto this monitor check box allows you to drag items across your screen onto alternate monitors. Or, you can resize a window to stretch it across more than one monitor.

The monitor that is designated as the primary monitor will display the logon dialog box when you start your computer.