MCSE Boot Camp Training

LAN Enhancement Components Component Function
*Repeater Resides in the Physical Layer of the OSI model. Regenerates signals for retransmission. Moves packets from one physical media to another. Will pass broadcast storms. Cannot connect different network topologies or access methods.
*Bridge         Resides in the MAC sublayer of the Data Link Layer of the OSI model. Bridges are used to segment networks. They forward packets based on address of destination node. Uses RAM to build a routing table based on source addresses. Will connect dissimilar network topologies. Will forward all protocols. Regenerates the signal at the packet level.
*Remote Bridge Same as bridge, but used for telephone communications. Uses STA (Spanning Tree Algorithm).
*Router     Resides in the Network Layer of the OSI model. Is used to switch and route packets across multiple networks. Uses RAM to build a routing table based on network addresses. Shares status and routing information to other routers to provide better traffic management and bypass slow connections. Will not pass broadcast traffic. Are slower than bridges due to complex functions. Strips off Data Link Layer source and destination addresses and then recreates them for packets. Routers can accomodate multiple active paths between LAN segments.
*Brouter Will act as a router for specified protocols and as a bridge for other specified protocols.
*Gateway Resides in the Transport, Session, Presentation and Application Layers of the OSI model. Used for communications between different network types (i.e. Windows NT and IBM SNA). Takes the packet, strips off the old protocol and repackages it for the receiving network.
*Multiplexer Device that can divide transimissions into two or more channels. Multiplexing - Several signals from different sources are collected into the component and are fed into one cable for transmission.
*Spanning Tree Algortithm - was developed for bridges to determine the most efficient network in path when there are multiple paths to choose from.
 


Click here to continue :
 
 

CCNP BootCamp, CCNP Bootcamps, cisco CCNP Boot Camp, ccnp cisco boot camp, ccnp Training Boot camp, ccnp Upgrade Boot camp, ccnp Boot camp Training, ccnp training Boot camp, ccnp boot camp Classes, cisco ccnp Boot Camp, ccnp BootCamp, ccnp 2003 Bootcamp, cisco ccnp BootCamp, ccnp cisco 2003 bootcamp, ccnp 2000 Bootcamp, ccnp Upgrade Bootcamp, ccnp Bootcamp Training, ccnp training Bootcamp, ccnp bootcamp Classes, cisco ccnp BootCamp, ccnp boot camp, ccnp, Boot camp, ccnp bootcamp, ccnp boot camps, ccnp bootcamps, ccnp camp, ccnp camps, ccnp Boot camp USA, ccnp boot camp UK, ccnp boot camps India, ccnp bootcamps Europe, ccnp camp UK, ccnp camps, ccnp Boot camp asia, ccnp bootcamp usa, ccnp boot camps europe, ccnp bootcamps UK, ccnp camp USA, ccnp camps California, ccnp Boot camp Brighton london, ccnp bootcamp cheapest, UK ccnp boot camps, USA ccnp bootcamps, cheapest ccnp camp, ccnp camps Japan, ccnp camp Australia, ccnp camps Switzerland, boot camps ccnp, Bootcamp ccnp, Boot camp ccnp USA, bootcamp ccnp UK, boot camps ccnp UK, Boot camps, USA, UK, India, brighton, california, Mumbai, Daman, San mateo, america, europe, asia
 

 

MCSE CCNA CCNP Bootcamp Training

 

MCSE Boot Camp, CCNA Bootcamps, CCNP Boot camp Certification Training

MCSE Guide

Free MCSE
Free MCSE Training
MCSE
MCSE 2003
MCSE Books
MCSE Boot Camp
MCSE Brain dumps
MCSE Certification
MCSE Exam
MCSE Free
MCSE Jobs
MCSE Logo
MCSE Online
MCSE Online Training
MCSE Practice
MCSE Practice Exams
MCSE Practice Tests
MCSE Requirements
MCSE Resume
MCSE Salary
MCSE Self Paced Training Kit
MCSE Study
MCSE Study Guide
MCSE Study Guides
MCSE Test
MCSE Testing
MCSE Training
MCSE Training Kit
MCSE Training Video
MCSE Windows 2003
Microsoft MCSE Training
Training MCSE
Windows 2003 MCSE

 

 

MCSE

Hardware Devices and Drivers

 Implement, manage, and troubleshoot disk devices.

You must be logged on as an administrator or as a member of the Administrators group in order to install a device using the Add/Remove Hardware wizard.

Install, configure, and manage DVD and CD-ROM devices.

If the device is Plug and Play, or it is a necessary startup device like the hard disk, this detection happens automatically. However, for some older devices, after you connect it to your computer, you may have to restart your computer. Windows 2000 then attempts to detect your new device.

If the device is not Plug and Play, you may have to use the Add/Remove Hardware wizard to tell Windows 2000 what type of device you are installing. After the device is detected, or you identify the device using the Add/Remove Hardware wizard, Windows 2000 may ask you to insert the Windows 2000 CD-ROM or the manufacturer's floppy disk so it can load the proper device drivers.

After the device drivers are loaded onto your system, Windows 2000 configures the properties and settings for the device. Although you can manually configure device properties and settings, you should let Windows 2000 do it. When you manually configure properties and settings, the settings become fixed, which means Windows 2000 cannot modify them in the future if there is a problem/conflict with another device.