Connect to computers by using dial-up
networking.
-
Open Network and Dial-up Connections.
-
Double-click Make New Connection, and then
click Next.
-
Select Connect directly to another compter,
click Next, and then follow the instructions
in the Network Connection wizard.
Connect to computers by
using a virtual private network (VPN)
connection.
-
Open Network and Dial-up Connections.
-
Double-click Make New Connection, and then
click Next.
-
Click Connect to a private network through
the Internet, and click Next.
-
Type the host name or IP address of the
computer or network to which you are
connecting, and then click Next.
-
Select either Only for myself or For all
users, and then click Next.
-
If you want to let other computers access
resources through this dial-up connection,
select the Enable Internet connection
sharing for this connection check box, and
then click Next.
-
Type a name for the connection, and then
click Finish.
Create a dial-up connection to connect to a
remote access server.
When
a remote access client makes a nonpermanent,
dial-up connection to a physical port on a
remote access server by using the service of a
telecommunications provider such as analog
phone, ISDN, or X.25. The best example of
dial-up networking is that of a dial-up
networking client who dials the phone number of
one of the ports of a remote access server.
Dial-up networking over an analog phone or ISDN
is a direct physical connection between the
dial-up networking client and the dial-up
networking server. You can encrypt data sent
over the connection, but it is not required.
Windows 2000 Server provides traditional dial-up
remote access services to support mobile users
or home users who are dialing in to organization
intranets. Dial-up equipment that is installed
on a remote access server running Windows 2000
answers incoming connection requests from
dial-up networking clients. The remote access
server answers the call, authenticates and
authorizes the caller, and transfers data
between the dial-up networking client and the
organization intranet.
To create a dail-up connection to a remote
access server
-
Open Network and Dial-up Connections.
-
Double-click Make New Connection, and then
click Next.
-
Select Dial-up to private network, click
Next, and then follow the instructions in
the Network Connection wizard.
|
